Solar Service & Maintenance

Keeping Your Solar System Performing.

Servicing, fault finding, inverter diagnostics, panel checks, and compliance testing for existing solar setups across Melbourne. We look after retirement villages, car dealerships, schools, and commercial sites that need their solar working — not sitting idle.

Solar that's not maintained is solar that quietly loses money.

Most owners only find out their system has stopped exporting properly when the next bill lands. Regular servicing keeps the panels producing, the inverter healthy, and the compliance paperwork sorted before something fails.

Output drops silently

Dirty panels, micro-cracks, a tripped isolator, a dying inverter capacitor — none of these throw an obvious error. They just chip away at output until the bill finally tells the story.

Compliance keeps moving

RCDs, exit and emergency lighting, switchboard standards — the regs don't sit still. Regular testing and documentation keep retirement villages, schools, and commercial sites on the right side of an audit.

The original installer is gone

A huge number of solar installs in Melbourne came from companies that have since vanished. When something fails, you need a licensed sparky who can pick up an unfamiliar system and sort it.

One point of contact

Solar, switchboards, RCDs, emergency lights — same licensed electrician, same paperwork, one report. No chasing three trades to get one site signed off.

Solar service & compliance, end to end.

Whether it's a single-site fault call or a scheduled maintenance run across a portfolio, here's what we handle.

Solar System Servicing

Scheduled performance checks across panels, inverter, isolators, and DC cabling — with a written report so you can see exactly what your system is doing.

Performance Checks

Comparing live output against expected — accounting for season, orientation, and shading — so under-performance shows up before the energy bill does.

Fault Finding

System tripping, error codes on the inverter, sudden drop in output, retailer disputing your exports — we trace it, document it, and quote the fix in plain English.

Inverter Diagnostics

Reading error logs, testing DC and AC sides, isolating dead strings, identifying whether the inverter needs a firmware update, a part, or a full replacement.

Panel Inspection & Cleaning Advice

Visual checks for cracks, hot spots, lifted tiles, bird-proofing, and trapped debris — plus honest advice on whether you actually need a clean or if it won't move the needle.

RCD Testing

Push-button and trip-time testing on residual current devices, with full compliance reports for commercial and care-sector sites.

Exit & Emergency Lighting

6-monthly and annual testing of exit signs and emergency luminaires to AS 2293, with logbook entries so your site is audit-ready.

Compliance Reporting

Clean, written reports after every visit — what was tested, what passed, what needs action, and what's been booked in. Easy to file, easy to hand to an auditor.

Switchboard & Isolator Checks

Thermal checks, isolator condition, labelling, surge protection — the bits that fail quietly and then cause a callout at the worst possible time.

Built for sites that can't afford downtime.

We work across operators who need solar systems, RCDs, and emergency lighting kept compliant and producing — without a fuss.

Retirement Villages

Multi-building sites with solar arrays, emergency lighting across corridors and common areas, and RCDs that must stay compliant. We handle scheduled service runs and after-hours fault calls.

Car Dealerships

Big roof, big solar systems, big showroom lighting loads. We keep arrays producing, isolators safe, and showroom emergency lighting tested so the doors stay open.

Schools

Classrooms, halls, and admin blocks — solar arrays that need consistent output, plus RCD and emergency lighting testing scheduled around term breaks. We work in, document, and disappear.

The Hyperactive service process.

Straightforward, transparent, and built around minimising disruption to your site.

01

Site Walk

Scope & access

We walk the site, note the array layout, inverter location, switchboard, emergency lighting, and RCD setup — then quote the service scope in writing.

02

Service Visit

Test, inspect, document

Inverter diagnostics, panel inspection, isolator and switchboard checks, RCD push-button and trip tests, emergency light run-down — all logged on the day.

03

Written Report

Pass / fail / fix

You get a clean PDF report — what was tested, what passed, what needs urgent attention, and what we recommend keeping an eye on. Easy to file, easy to act on.

04

Fix & Schedule

Repairs + next service

Anything urgent gets a quote and a booking. Then we put your site on a recurring service schedule so nothing slips through the cracks.

Why operators stick with us.

Licensed, documented, easy to deal with. The same standard our existing electrical clients already know — applied to solar service.

Fully Licensed Electricians

REC-licensed sparkies who know solar, switchboards, and compliance testing. No backpackers, no chuck-it-on-the-roof cowboys.

Documentation Built In

Every service visit gets a written report. RCD logs, emergency lighting logbook entries, inverter test sheets — all there when the auditor asks.

Honest Diagnosis

If a clean won't move the needle, we'll tell you. If your inverter is genuinely cooked, we'll tell you that too. No upsell theatre.

One Number for Support

You ring Mitch. Not a call centre, not a ticket queue. A licensed electrician who already knows your site.

Tidy On Site

We work clean, leave the site as we found it, and don't get in the way of residents, staff, students, or customers walking through.

Brand-Agnostic Service

We service whatever's already on your roof — Fronius, SMA, Sungrow, Goodwe, Solis, the lot. No allegiance, no awkward conversations.

Coming Soon

New solar & battery installs — on the way.

Right now we're heads-down on solar service and maintenance. New solar and battery installs are coming next — register your interest and we'll be in touch the moment we open bookings, with priority access for existing Hyperactive customers.

Register Your Interest

Solar service FAQs

The questions we hear from operators every week.

For most commercial and care-sector sites we recommend annual servicing as a minimum, with RCD and emergency lighting testing at the intervals required by the relevant standard. High-output sites (dealerships, larger villages) often benefit from a 6-monthly visit.

Yes — that's the bulk of what we do. We pick up systems installed by companies that have since vanished, document what's actually on the roof, and bring the site back into a maintained state with proper paperwork.

Yes. We'll read the error log, test the DC and AC sides, and tell you straight whether it's a firmware update, a part swap, or a full inverter replacement. You get a written quote either way.

Yes — 6-monthly discharge tests, annual full-duration tests, logbook entries, and replacement of failed fittings. Common across schools, retirement villages, and showroom sites.

Sometimes yes, sometimes no. If you're near a main road, under flowering gums, or next to a worksite, almost certainly. If you're in a clean coastal pocket with regular rain, often a clean won't move the needle and we'll tell you that.

Not yet — we're focused on solar service and maintenance right now. New solar and battery installs are coming soon. Register your interest through the contact form and you'll be on our early-access list when bookings open.

That's a big part of what we do. We service the system, test what needs testing, replace what's failed, and give you a stack of clean reports your auditor can sign off on without chasing us for missing paperwork.

Book a solar service.

Tell us about your site — retirement village, dealership, school, or commercial property — and we'll quote a scope and a date. Straight answers, written reports, properly licensed work.